Patch Cable

The cable's outer jacket is stripped about 1" in front of the sleeving/heatshrink with the excess shielding cut away. If you plan to use with an IO Panel and want the individual wires stripped, tinned, or any other prep work done, let us know in the order notes.

About 4.5mm including the sleeving.

Yes! Simply unscrew the connector top, take note of which strain relief hole is being used, then remove the strain relief. Once the top is removed, you can unscrew the bottom base about halfway and turn the male thread in 45° increments. Then screw it all back together, making sure you use the same strain relief hole.

We're happy to customize the cable to whatever specification you need. Check out our custom shop for more details and to submit a request. Please note that we don't apply sleeving to cable lengths longer than 25ft for our own sanity.

All the wiring is held to a strict 110ohm, so it can be used for any balanced signal—microphones, line-level analog audio, AES3 digital audio, DMX lighting, MIDI, comms, and more.

Yes! Just let us know in the order notes what you want on the label, and we'll put it under the clear heatshrink by our logo. We can also add an unshrunk piece of clear heatshrink to the cable so you can add your own label later.